Scanning Documents
User Manual H12 / SCAMAX® 8x1 - Version 2019.12
5.4.4.
Using the Dual Input Hopper
If the scanner is operated with the Dual Input Hopper, this is mounted movable horizontally on the
front panel of the device. The side shelves are therefore smaller than in the version with a Single Input
Hopper
(see chapter
The Dual Input Hopper was designed to ensure conti-
nuous batch processing. This means that in the so-called
Dual Feeder Mode
(see chapter
) an Input Tray is
processed, while the other one can be already filled with
the next paper stack . If the currently processed Input
Tray is empty, the Dual Input Hopper moves to the left
or right to position the filled Input Tray under the feeder
system, while the empty Input Tray is lowered. The scan
process is automatically continued mutually until both Input Trays remain empty or the user stops
the scan process manually
(see chapter
).
In order to consistently ensure continuous scan practice, in addition to the Dual Input Hopper, also
the use of a 2nd Output Hopper (
see chapter
) is recommended.
WARNING
When using a Dual Input Hopper, please make absolutely sure to keep the hopper’s sideways
range of movement clear at all times. Otherwise, there is a danger of sustaining pinching or
concussion injuries.