Labfors 5 – Version for Microorganisms
Before Fermentation/Cultivation
Page
110
of
205
22 January 2019
3.
Ensure that the baffles are aligned correctly, so that they fit
into the glass vessel (round bottom!).
8.1.5 Moistening/Filling the Culture Vessel
If the medium in the culture vessel is to be autoclaved, this can
take place before the top plate is put in position and the additional
component parts are mounted.
Note the following about filling the culture vessel before autoclav-
ing:
Before autoclaving, only top up with heat-resistant media.
During autoclaving, evaporation may result in a loss of volume
and thus to increased salt concentration in the medium. If nec-
essary, top up with sterile water.
INFORMATION
Development of steam is not possible when autoclaving an
empty and dry culture vessel. Successful sterilisation is not
guaranteed.
Ensure that there is liquid in the culture vessel (approx. 10 mL of
water per litre of total volume).
Содержание Labfors 5
Страница 208: ......
