60
System Image Handling
Information for Slot 0:
SN2300 (Admin State: Application Started, Real State: Application
Started)
Hardware Version : 1, 1
Serial number
: 100000021579
PLD Version
: 23010204h
Software Version : SmartWare R2.00 BUILD22031
Information for Slot 1:
this Slot is empty
Information for Slot 2:
IC-4BRV (Admin State: Application Started, Real State: Kernel
Started)
Hardware Version : 1
PLD Version
: 170001h
Software Version : Build 24026, min required : Build 24027
Loader Version
: Build 39, min required: Build 39
Information for Slot 3:
this Slot is empty
8.8 Copy System Images from a Network Server to Flash
Memory
As mentioned above the system image file contains the application software that runs SmartWare; it
is loaded in the flash memory at the Inalp Networks AG factory. Since most of the voice and data
features of the SmartNode are defined and implemented within the application software, upgrading
to a new release might be necessary if you want to have additional voice and data features available.
A new system image file has to be stored permanently into the flash memory of your SmartNode to
be present when booting the device.
Since the system image file is preloaded at the Inalp Networks AG factory, you will only have to
download new SmartWare application software if a major software upgrade is necessary or if
recommended by Inalp Networks AG Under normal circumstances downloading a system image file
should not be needed.
Downloading a new system image file means storing it permanently at a defined location within the
SmartNode flash memory. To store the system image file a special download script file has to be
used. This script file defines how the system image file is to be handled and where it is to be stored.
You cannot download any system image file without an appropriate script file.
Each line in script file is a command for the CLI of your SmartNode. To download a system image
file, which will replace the currently running SmartWare application software, a script file with only
one command is necessary.
Comment lines must have a hash character # in column one and can appear anywhere in the script
file. Comment lines contain information for administrators or operators who maintain or use the
script file.
The following example shows a script file used to download a system image and command line
syntax definition file from a TFTP server.
# script file for system image download
# Inalp Networks AG 2001-10-24
image.bin 1369474 21; ver 2300.1,2300.2;
cli.xml
+/flash/cli/spec.xml
#the next line deletes the whole embedded file system
Software Configuration Guide Release 2.10, Revision 1.00
Содержание SmartWare Release 2.10
Страница 2: ...2 Legal Notice Software Configuration Guide Release 2 10 Revision 1 00...
Страница 15: ...Terms and Definitions 15 Software Configuration Guide Release 2 10 Revision 1 00...
Страница 218: ...218 PPP Configuration no shutdown Software Configuration Guide Release 2 10 Revision 1 00...
Страница 272: ...272 Tone Configuration Software Configuration Guide Release 2 10 Revision 1 00...