Inalp Networks SmartWare Release 2.10, Руководство по настройке программного обеспечения

Страница: 230 / 357

230 CS Context Overview
Configure Call Routing
Next we create the PSTN interfaces and configure call routing:
SN(cfg)#context cs
SN(ctx-cs)[switch]#interface pstn PBX
SN(if-pstn)[PBX]#routing dest-table calledNumberRouting
SN(if-pstn)[PBX]#fallback dest-interface PublicPSTN
SN(if-pstn)[PBX]#exit
SN(ctx-cs)[switch]#interface pstn PublicPSTN
SN(if-pstn)[PublicP~]#routing dest-table calledNumberRouting
SN(if-pstn)[PublicP~]#exit
SN(ctx-cs)[switch]#
In addition we create the two H.323 interfaces and configure call routing:
SN(ctx-cs)[switch]#interface h323 CompanyOfficeA
SN(if-h323)[Company~]#routing dest-table calledNumberRouting
SN(if-h323)[Company~]#remoteip 146.86.130.11
SN(if-h323)[Company~]#exit
SN(ctx-cs)[switch]#interface h323 CompanyOfficeB
SN(if-h323)[Company~]#routing dest-table calledNumberRouting
SN(if-h323)[Company~]#remoteip 146.86.130.24
SN(if-h323)[Company~]#exit
SN(ctx-cs)[switch]#
Last we configure the Session Router:
SN(ctx-cs)[switch]#called-party CalledNumberRouting 1 dest-interface
CompanyOfficeA
SN(ctx-cs)[switch]#called-party CalledNumberRouting 2 dest-interface
CompanyOfficeB
SN(ctx-cs)[switch]#called-party CalledNumberRouting 5 dest-interface
PBX
SN(ctx-cs)[switch]#called-party CalledNumberRouting default dest-
interface PublicPSTN
SN(ctx-cs)[switch]#exit
SN(cfg)#
Configure Voice over IP Settings
Because we need G.723 as codec we enable DTMF relay:
SN(cfg)#profile voip H323VoIPProfile
SN(pf-voip)[H323VoI~]#dtmf-relay
SN(pf-voip)[H323VoI~]#exit
SN(cfg)#
Configure ISDN Ports
Next step is to configure the ISDN ports:
SN(cfg)#port isdn 2 0
SN(prt-isdn)[2/0]#down
SN(prt-isdn)[2/0]#channel-range 0 1
SN(prt-isdn)[2/0]#l2proto pp
Software Configuration Guide Release 2.10, Revision 1.00
SN(prt-isdn)[2/0]#l3proto pss1
SN(prt-isdn)[2/0]#max-channels 2