Inalp Networks SmartWare Release 2.10, Руководство по настройке программного обеспечения

Страница: 48 / 357

48 Accessing the Command Line Interface
Command Purpose
Step 1 node >su account-name
Change to the user user account account-name
Example: Sw itching to Another Account
The following example shows how to change from your current user account to an administrator
account, starting from operator execution mode. In the example below the
who command is used to
check the identity within both accounts
login: support
password : <password>
SN> who
You are operator support
SN>
su super
Enter password: <password>
SN> who
You are administrator super
6.15 Checking Identity and Connected Users
To display who is logged in or to see more detailed information about users and process states the
who command provides this information. Depending on execution mode the command displays
varying information. In administrator execution mode the command output is more detailed and
shows information about the ID, user name, state, idle time and location. In operator execution mode
only the user name being used at the moment is reported, which helps checking the identity.
Procedure
To report who is logged in or to show more detailed information about users and process states,
depending on the execution mode working in
Mode
Administrator or operator execution
Command Purpose
Step 1 node #who Shows more detailed information about the users ID,
name, state, idle time and location
or or
node >who
Shows the user login identity
Example: Checking Identity and Connected Users
The following example shows how to report who is logged in or more detailed information about
users and process states, depending on the execution mode working in.
Used in administrator execution mode:
SN# who
ID User name State Idle Location
* 0 administrator exec 00:00:00 172.16.224.44:1160
1 support exec 00:01:56 172.16.224.44:1165
Software Configuration Guide Release 2.10, Revision 1.00