Inalp Networks SmartWare Release 2.10, Руководство по настройке программного обеспечения

Страница: 174 / 357

174 SNMP Configuration
“Protocol Operations for Version 2 of the Simple Network Management Protocol
(SNMPv2)”.
• A set of fundamental applications described in RFC 2573 “SNMP Applications” and the
view-based access control mechanism described in RFC 2575 “View-Based Access Control
Model (VACM) for the Simple Network Management Protocol (SNMP)”.
20.2 Identification of the SmartNode 1000 and 2000 Series
via SNMP
All models of the Inalp Networks AG SmartNode 1000 and 2000 series devices have their
unambiguous value assigned sysObjectID (.iso.org.dod.internet.mgmt.mib-2.system.sysObjectID)
object. Table 20-1 lists the returned value when reading the sysObjectID object for each SmartNode
model.
SmartNode Model SysObjectID
SmartNode 1200 .iso.org.dod.internet.private.enterprises.inalp.products.sn1200
1.3.6.1.4.1. 5349.2.2.1
SmartNode 1400 .iso.org.dod.internet.private.enterprises.inalp.products.sn1400
1.3.6.1.4.1. 5349.2.2.2
SmartNode 2300 .iso.org.dod.internet.private.enterprises.inalp.products.sn2300
1.3.6.1.4.1. 5349.2.2.3
Table 20-1: SmartNode Models and their Unique sysObjectID
According to Table 25-1 a SNMP get request to .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID of a
SmartNode 1200 device reads out a numeric OID of 1.3.6.1.4.1. 5349.2.2.1 , which represents a
SmartNode 1200 device. The mapping of the sysObjectID to each of the SmartNode model is realized
with the SmartNode product identification MIB.
20.3 Warnings
The SNMP agent running in the SmartWare is SNMP version 1 (SNMPv1) compliant. Therefore both
SNMP version 2 (SNMPv2) and SNMP version 3 (SNMPv3) are
not supported.
20.4 SNMP Tools
Inalp Networks AG recommends the AdventNet MibBrowser, TrapViewer and other SNMP tools.
Check the AdventNet Web server at http://www.adventnet.com for latest releases.
Refer to the section “Using the AdventNet SNMP Utilities” for more detailed information on how to
use these tools together with SmartNode 1000 and 2000 series devices.
20.5 SNMP Configuration Task List
To configure SNMP, perform the tasks described in the following sections. The tasks in the first three
sections are required; the tasks in the remaining sections are optional, but might be required for your
application.
•
Setting basic system information (Required)
• Setting access community information (Required)
• Setting allowed host information (Required)
• Specifying the default SNMP trap target (Optional)
• Displaying SNMP related information (Optional)
Software Configuration Guide Release 2.10, Revision 1.00