Inalp Networks SmartWare Release 2.10, Руководство по настройке программного обеспечения

Страница: 152 / 357

152 RIP Configuration
SN(cfg)# context ip router
SN(ctx-ip)[router]# interface wan
SN(if-ip)[wan]# rip supply
18.5 Enabling an Interface to Receive RIP
By default an interface does not listen to routing information.
Procedure
To enable interface to receive RIP information
Mode
Interface
Command Purpose
Step 1 node (if-ip)[ name ]#rip receive Enables receive RIP on interface name
Example: Enabling Receive RIP
The following example shows how to enable receive RIP on IP interface wan on a SmartNode.
SN(cfg)# context ip router
SN(ctx-ip)[router]# interface wan
SN(if-ip)[wan]# rip receive
18.6 Specifying the Send RIP Version
By default, the SmartWare application software sends RIP 1compatible packets. The SmartWare
application software allows sending RIP version 1, version 1 compatible or version 2 packets.
Alternatively, you can explicitly configure the RIP version to be sent with the last command
argument as following:
• 1 RIPv1
• 1compatible RIPv1 compatible
• 2 RIPv2
Procedure
To select the sending RIP version on interface
Mode
Interface
Command Purpose
Step 1 node (if-ip)[ name ]# rip send
version {1 | 1compatible | 2}
Selects send RIP version for interface name
Example: Specifying the Send RIP
The following example shows how to select send RIP version 1compatible on IP interface wan on a
SmartNode.
SN(cfg)# context ip router
SN(ctx-ip)[router]# interface wan
SN(if-ip)[wan]# rip send version 1compatible
Software Configuration Guide Release 2.10, Revision 1.00