Inalp Networks SmartWare Release 2.10, Руководство по настройке программного обеспечения

Страница: 322 / 357

322 VoIP Profile Configuration
Figure 32-8: Fax relay and fax bypass
The commands described below offer more functionality than fax only. Modem connections could be
configured in the same manner as fax. Use one of the protocolls V.34, V.32 etc. for configuring a
modem connection. For a list of all available protocolls use the CLI help.
Procedure
To configure fax bypass
Mode
Profile VoIP
Command Purpose
Step 1 node (pf-voip)[ name ]#fax-data-
transmission protocol bypass
Enable bypass mode. Protocol could be ‘fax’ or
one of V.34, V.32, etc. for modem connections.
Step 2 node (pf-voip)[ name ]#fax-data-
bypass-coder codec
Selects codec for bypass mode. Use ‘g711_64k’,
‘g726_32k’ or ‘g726_40k’ (no or little
compression) for best results.
Example: Enable fax bypass
The following example shows how to configure fax bypass with codec G.711.
SN> enable
SN# configure
SN(cfg)# profile voip H323-VoIP
SN(pf-voip)[H323-Vo~]# fax-data-transmission fax bypass
SN(pf-voip)[H323-Vo~]# fax-data-bypass-coder g711_64k
Procedure
To configure fax relay as per T.38
Mode
Profile VoIP
Command Purpose
Step 1 node (pf-voip)[ name ]#fax-data-
transmission fax relay
Enable relay mode with T.38 fax relay protocol
using UDP. Protocols other than ‘fax’ do not
work with ‘relay’
Software Configuration Guide Release 2.10, Revision 1.00