70 Configuration
File
Handling
memory region
nvram:
of the target device. After this the startup configuration is transferred to the
TFTP server from where it can be distributed to other SmartNode devices, which therefore get clones
of the starting system if the configuration does not need any modifications.
9.8 Replacing the Startup Configuration with a
Configuration downloaded from TFTP Server
From within the administration execution mode, the startup-configuration is replaced by
downloading a configuration from the TFTP server into the flash memory area where the startup
configuration has to be stored.
Procedure
To copy a specified configuration with another name in flash memory
Mode
Administrator execution
Command
Purpose
Step 1
node
(cfg)# copy tftp://
ip-address/new-startup
nvram:startup-config
Downloads the configuration file
new-
startup
from the TFTP server at address
ip-address
replacing the existing
persistent startup configuration. This
progress is visualized with a counter,
counting up from 0 to 100% according
to the downloaded amount of the file
size. If the download should fail an
error message “% File Transfer - Get
failed” is displayed.
Example of Configuration dow nload from TFTP Server
The following example shows how to overwrite and therefore replace the persistent startup
configuration in the flash memory of a SmartNode with the configuration contained in the file
new-
startup
located on the TFTP server at IP address 172.16.36.80.
Step 1
First download the startup configuration with the
copy
command into the flash memory area where
the startup configuration is to be stored.
SN>
enable
SN#
configure
SN(cfg)#
copy tftp://172.16.36.80/user/new-startup nvram:startup-
config
Download...100%
SN(cfg)#
Step 2
Check the content of the persistent startup configuration by listing its command settings with the
show
command.
SN#
show nvram:startup-config
Startup configuration:
#----------------------------------------------------------------#
# SmartWare R2.00 BUILD22031
#
Software Configuration Guide Release 2.10, Revision 1.00
# 2001-10-25T09:20:42
#
# Generated configuration file
#
Содержание SmartWare Release 2.10
Страница 2: ...2 Legal Notice Software Configuration Guide Release 2 10 Revision 1 00...
Страница 15: ...Terms and Definitions 15 Software Configuration Guide Release 2 10 Revision 1 00...
Страница 218: ...218 PPP Configuration no shutdown Software Configuration Guide Release 2 10 Revision 1 00...
Страница 272: ...272 Tone Configuration Software Configuration Guide Release 2 10 Revision 1 00...