Inalp Networks SmartWare Release 2.10, Руководство по настройке программного обеспечения

Страница: 158 / 357

158 RIP Configuration
Software Configuration Guide Release 2.10, Revision 1.00
SmartWare also support displaying global RIP information for the IP router context.
Command Purpose
Step 1 node (if-ip)[ name ]#rip route-
holddown
Enables holding down aged routes on interface
name
Example: Enabling Holding Dow n Aged Routes
The following example shows how to enable holding down of aged routes on IP interface wan on a
SmartNode.
SN(cfg)# context ip router
SN(ctx-ip)[router]# interface wan
SN(if-ip)[wan]# rip route-holddown
18.16 Displaying RIP Configuration of an IP Interface
Displaying the RIP configuration of an IP interface is useful to list the settings.
Procedure
To display the RIP configuration of an interface
Mode
Interface
Command Purpose
Step 1 node (if-ip)[ name ]#show rip
interface ifname
Displays the RIP binding of an IP interface on
name
Example: Displaying RIP Configuration of an IP Interface
The following example shows how to display the RIP configuration of IP interface wan of a
SmartNode.
SN(cfg)# context ip router
SN(ctx-ip)[router]# interface wan
SN(if-ip)[wan]# show rip interface wan
Interface wan (IP context router):
--------------------------------------------------
listen: disabled
supply: enabled
send version: 1compatible
receive version: 1or2
learn host: disabled
learn default: disabled
announce host: disabled
announce static: disabled
announce default: disabled
announce self-as-default: disabled
route-holddown: enabled
poison-reverse: disabled
auto-summary: disabled
split-horizon: disabled
default-route-value: 0
--------------------------------------------------
18.17 Displaying Global RIP Information