IEMCA BOSS 542 CNC, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 167

6
2
TECHNICAL INFORMATION
302.034
❑ ❑ ❑ ❑
Main parts
A - Magazine ; where bars are stored.
B - Bar selection device ; it allows the first
bar to be lowered into the guides and
holds back the remaining bars in the
magazine.
C - Guides ; they guide the bars during ma-
chining.
D - Bar-pusher ; it pushes the bar during
machining.
E - Feed chain ; it transmits motion from the
drive system to the bar-pusher.
F - Drive system ; it drives the bar-pusher.
G - Clutch ; it transmits motion from the drive
system to the feed chain. It can be set to
obtain thrust adjustment.
H - Insertion/extraction drive ; it drives the
bar feeder parts controlling bar insertion
into the collet and subsequent bar rem-
nant extraction. It also drives the bar
feeder parts controlling guide opening/
closing and bar selection.
B - Clamps ; they hold the bar during bar in-
troduction in and extraction from the bar-
pusher collet.
C - Facing device ; it sends a signal at bar
passage.
D - Remnant collection box ; bar remnants
are dropped into this box after extraction
from the bar-pusher collet.
F - Lubricating pump ; it delivers oil to the
guides.
G - Oil recovery device ; it collects oil flowing out of
the guides.
H - Main push-button panel ; feeder functions are
programmed and controlled from this panel.
I - Additional panel ; it makes it possible to control
the main feeder functions without leaving the
lathe.
J - Electric cabinet ; it contains the electric switch-
board.
K - Lathe
34.002 Ec. 1
Q N
L A
F
B
P
G
C
E
D
H
U M
S
R
T
Q N
L A
F
B
P
G
C
E
D
H
U M
S
R
T
(reverse version)
BOSS - MINI BOSS
BOSSr - MINI BOSSr
(standard version)