IEMCA BOSS 542 CNC, Руководство по эксплуатации и техническому обслуживанию

Страница: 131 / 167

26
3
OPERATION INFORMATION
302.035
Defines the “OPEN COLLET” speed value.
Accepts values from 0 to 7.
Examples: value 0....................................... speed 0 mm/sec
value 1,5.................................... speed 150 mm/sec
value 7....................................... speed 700 mm/sec
INFORMATION: during the MANUAL cycle, press or , to
move the carriage according to the speed entered.
When receiving the “OPEN COLLET” signal from lathe, the bar-pusher delays
feeding, according to the time previously entered.
Application example: to be used when the mechanical collet opening is
slow (double cone collet).
When receiving the “CLOSED COLLET” signal from lathe, the bar-pusher con-
tinues to push, according to the time previously entered.
Application example: to be used when the mechanical collet closing is
slow (double cone collet).
Controls the slowing down section length before the entry into collet.
This value concerns point
C
(facing point).
Along said section, the bar moves according to the entry into collet
speed
(parameter 11) .
: >
n o . 7 o p e n c o l l e t s p e e d
7
Phase Default
7
machining
8
Phase Default
0 sec.
machining : > ( s e c )
n o . 8 o p e n c o l l e t t h r u s t
l a g
9
Phase Default
0 sec.
machining : > ( s e c )
n o . 9 c l o s e d c o l l e t t h r u s t
l a g
10
Phase Default
bar
change
over
150 mm
: > ( mm )
n o . 1 0 c o l l e t e n t r y s l o w i n g
d o w n
C
parameter 10
31.030 Ec.0