IEMCA BOSS 542 CNC, Руководство по эксплуатации и техническому обслуживанию

Страница: 79 / 167

77
6
USE AND OPERATION
302.034
6.5.3 Automatic cycle start
•
Power the lathe on.
•
Press
to start the bar feeder.
•
Press
to select the manual mode.
•
Perform “BAR FEEDER ZERO SETTING” IN THE
FOLLOWING WAY press
if the upper guides are not closed, the feeder will not
perform “BAR FEEDER ZERO SETTING”; messages
are displayed concerning the operations to carry out in
order to bring the guides to the required position.
After carrying out the required operations;
press
•
Enter the parameter values (refer to the “Push-button
panel instruction manual” paragraph “Parameters -
Description and entry”).
•
Check and modify the feed clutch thrust value if re-
quired (refer to the “Push-button panel instruction
manual” paragraph “CN functions - Description and
use”).
•
Turn the selector S95 to position 0.
Turn the selector S94 to position ’ to move the bar
head closer to the cutting tool.
To start machining, turn the selector
S95 to position
’ when the lathe collet is closed. In this way, you will
obtain automatic bar feeding until bar running out or
according to the selected program.
•
If you wish to refill the magazine during machining,
follow the procedure described under paragraph
6.5.1.
•
Empty the remnant collection box during machining.
CAUTION: do not manually lift weights exceed-
ing those prescribed by the applicable regulations
in force; ask for another worker’s help if neces-
sary.
CAUTION: wear personal protections prescribed
by the applicable regulations in force.
Place the box back under the remnant outlet.
+
+
34.135 Ec. 0
34.001 Ec. 0