Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
Page
68
of 84
v1/v2c Settings
Read Community:
Enter the community string/password here for read-
only SNMP access. The default read community string is "public".
Write Community:
Enter the community string/password here for
read/write SNMP access. The default write community string is "write".
NOTE: The community strings should be changed to unique passwords
before enabling SNMP, as the defaults are well known.
v3Settings
User Name:
Set the username for SNMPv3 access.
Authentication Protocol:
Set the SNMPv3 authentication protocol
(None, MD5, or SHA).
Authentication Password:
If an authentication protocol is selected, set
the authentication password.
Privacy Protocol:
Set the SNMPv3 privacy protocol (None, or AES).
Privacy Password:
If a privacy protocol is selected, set the privacy
password.
SNMP Traps
Trap Version:
Set the SNMP version (v1 or v3) for SNMP traps sent
from the system. The appropriate settings for the selected SNMP version
will need to be configured.
Trap Community:
Set the community string/password that will be sent
with all SNMPv1 traps. Some trap receivers can filter based on Trap
Community. This field is only used for v1 traps.