Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
Page
2
of 84
1.1.1
Intelligent Control Module (ICM)
•
High resolution OLED display with intelligent front panel controls
fully integrated into power chassis
•
TCP/IP Ethernet communications port
•
Embedded web server with easy-to-use graphical user interface
(GUI)
•
Intelligent monitoring, reporting and control of system and all
installed modules
•
HTTPS, SMTP, SNMP (v1, v2c, v3) protocols supported
•
Alarm notifications via GUI, e-mail, or text
•
Four digital site monitoring sensor inputs with alarm reporting
•
Data logging
•
Password protection
1.1.2
Power Module
•
100–300 VAC input with power factor correction
•
700- or 1,500-watt hot-swappable Power Modules
•
24- or 48-volt nominal DC output (floating ground)
•
Up to 95% efficiency
•
−30 to +60°C operating temperature range
1.1.3
Battery Management Module (BMMD)
•
Dual 100-amp battery disconnect circuit breakers
•
Integrated 150-amp low voltage disconnect
•
Advanced battery management features (ICM installed) including:
o
temperature compensated charging (lead-acid batteries only)
o
display of battery voltage
o
status
o
battery current
o
state of charge
o
run time remaining
o
adjustable LVD settings
o
configure advanced battery management features such as
boost charge parameters, maximum charge current, battery
capacity, battery test timer, and battery discharge test cutoff
voltage
•
Support for lead-acid and lithium-ion battery types (features differ
depending on battery type)
1.1.4
DC-DC Converter Module
•
700-watt, 12- or 24-volt DC integrated isolated DC-DC Converter
Module
•
Powered from the system DC bus
•
Monitoring and alarm reporting