Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
iv
CAUTION
Risk of personal injury or damage to equipment and
property. Always observe the following:
•
Install in a protected environment and keep sources of
moisture away from unit.
•
Ensure the total power consumption of the load does not
exceed the continuous rated capacity of the power supply
output.
•
Provide adequate support for the rear of the unit without
obstructing the air inlet or outlet openings.
•
Remove all metallic jewelry before working with the unit.
•
Wear appropriate eye protection and always use
appropriate tools during installation.
•
DC-AC Inverters should not be connected to the outputs of
the Load Distribution Module of a power system. DC-AC
Inverters create significant inrush current and may damage
the circuitry or interfere with the operation of power supplies
that they are connected to. Connecting an inverter in this way
may void the product warranty. ICT recommends connecting
a DC-AC inverter to the battery bank.
NOTICE
Risk of damage to equipment, environmental hazards, loss
of data and other undesirable consequences. Always
observe the following:
•
The unit must be properly handled, mounted, and installed.
•
Do not block air inlet or outlet openings.
•
Due to environmental factors which are common at outdoor
communications sites, power surges from lightning strikes,
electrostatic discharge, and utility power feeds can occur.
These surges can damage connected equipment.
•
This product is compliant and certified to IEC61000-4-5
Surge Immunity, however, additional surge suppression
methods must be followed to better protect this device.
•
Third-party surge suppression devices must be utilized to
protect AC input power feeds, and exposed DC power
conductors and data cables. To provide optimal protection,
these protection devices should be installed at both ends of
the exposed conductor, in close proximity to installed
equipment.
•
Consult with manufacturers of surge suppression devices to
select appropriately rated protection device(s) and proper
installation methods.
•
ICT’s product warranty does not cover damage caused by
power surges and electrostatic discharge events including
lightning.