Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
Page
39
of 84
4.2.1
STATUS
This tab provides the operating status of the unit.
DC Output
Output Status
: Shows status of the DC output. Will show Enabled if
providing DC output or Disabled if not.
Output Voltage
: Shows output DC voltage. This is an absolute value
and does not specify polarity.
Total System Current
: Shows total amps being supplied by the unit.
This includes loads and battery charging.
AC Mains
Input Voltage
: Shows the input AC voltage.
System Alarms
Form C Alarm
: Shows whether the unit is broadcasting a form-C alarm.
(Alarm or OK).
Power Module #x
: Shows status of the installed Power Modules (Alarm
or OK).
Alarm Input #x
: Shows status of the monitored form-C contacts (Alarm
or OK).
Battery Management
This section will show the status of the connected batteries. The section will
be labelled with the module number.
Battery Voltage:
Shows voltage of battery #1. This number does not
specify polarity.
Battery Current:
Shows the current that is passing from, or to the
batteries. This number is negative if the battery is discharging; positive
if the battery is being charged; and shows 0A if the battery is fully
charged. This number represents both batteries if this is a dual BMM
(BMMD).
Battery Temperature:
Shows the temperature measured on the
optional ICT Battery Temperature Probe (ICT-TMP).
Net Ah Count:
Shows the Ah that have been consumed from the battery.
Will display 0 Ah if the batteries are fully charged. Only displayed when
the unit is configured for lead-acid batteries.