Hybrid Ultra
855-350-050_Rev2.0_Instruction Manual
Page
42
of 84
Auto-Restart Delay
: Set the delay time (5 to 240 s) that the output will
remain off when output is remotely disabled using the "Auto-Restart"
button. The unit will automatically restart after the Auto-Restart Delay
period. The default setting is 15 seconds.
NOTE: The output voltage and current limit settings apply to the combined
output of all installed Power Modules. The ICM treats the combined
modules as a single high-power supply. Adjust the system Output
Voltage and Current Limit (see Section 4.2.2) to match the battery
type and system load requirements if required.
4.3
Power Modules
Use this tab to see the status of all installed Power Modules in the unit.
The graphic will display green for an installed Power Module that is working
as expected; a red display for an installed Power Module that has an active
alarm; and will be grey when a Power Module is not installed in that slot.
Module Status
Shows the slot that the Power Module is installed in; the rating of the Power
Module; and the status (Alarm or OK).
Online Power Module Capacity
Shows the combined maximum output capacity for all active Power
Modules.