3
WHEN CONNECTING TO THE NETWORK DIRECTLY
48
In the set mode menu screen, register the radios to be used with the Server.
■
Radio registration
D
Radio’s basic information setting
q
Hold down [EXIT/SET] for 1 second to select the
set mode menu screen.
w
Push [F-5•OTHERS] to enter the Others set mode.
e
Push [F-1•
▲
] or [F-2•
▼
] to select “Network Radio
Name.”
r
Push [F-5](EDIT) to enter the Network Radio Name
Edit mode.
t
Rotate the main dial to input a Network Radio
Name of up to 16 characters.
• Push [ABC] or [abc] to toggle upper and lower
case letters.
• Push [123] or [Symbol] to toggle between numer-
als and symbols.
• Push [F-1•
◀
] or [F-2•
▶
] for cursor movement.
• Push [F-3•DEL] to delete the selected character.
• You can input an ID using a keyboard connected
to the radio.
y
Push [F-5](SET) to set.
u
Push [F-1•
▲
] or [F-2•
▼
] to select “CI-V Address.”
q
Set
i
Rotate the main dial to input a CI-V address.
o
Push [F-1•
▲
] or [F-2•
▼
] to select “CI-V Baud Rate.”
q
Select
!0
Rotate the main dial to select the baud rate.
!1
Push [EXIT/SET] twice to exit the Set mode.
D
Adjust limitation setting
Remote stations can adjust the sound quality or audio
codec. Higher audio qualities will increase the amount
of data, which can cause voice delay or jumpiness, de-
pending on the network condition.
The Server can limit the maximum level of the sound
quality or audio codec.
Remote stations cannot program higher values than
the values programmed here.
• The following settings are not included with the IC-7850
and IC-7851. However, the settings are originally fixed in
those transceivers.
q
Hold down [EXIT/SET] for 1 second to select the
Set mode menu screen.
w
Push [F-5•OTHERS] to enter the Others set mode.
e
Push [F-1•
▲
] or [F-2•
▼
] to select “Network AF
Sample Rate.”
r
Rotate the main dial to limit the received audio
sampling rate that Remote stations can adjust.
Higher sampling rates will improve the audio qual-
ity. However, they also increase the amount of data,
which can cause voice delay or jumpiness, depend-
ing on the network condition.
Lower sampling rates will decrease the audio qual-
ity. However, they also decrease the amount of data.
• For the IC-7850 and IC-7851, the rates are fixed to:
8kHz, 12kHz, 16kHz, 24kHz, 48kHz.
t
Push [F-1•
▲
] or [F-2•
▼
] to select “Network AF Co-
decs.”
y
Rotate the main dial to limit the received audio
codec that Remote stations can adjust.
• For the IC-7850 and IC-7851, the codecs are fixed to:
LPCM 8bit, u-law 8bit, LPCM 16bit.
u
Push [F-1•
▲
] or [F-2•
▼
] to select “Network AF
Channels.”
i
Rotate the main dial to select whether or not to
allow Remote stations to select stereo sound.
When you select “1ch” (monaural), Remote stations
cannot program “2ch” (stereo).
If the Remote station selects “2ch,” stereo output
(L=Main band; R=Sub band).
• For the IC-7850 and IC-7851, the channel is fixed to
“2ch.”
