2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
38
When you are operating as a Base station, and a Remote station is accessing a radio that is physically connected
to your PC, you can monitor the received and transmitted audio.
• To monitor, you should connect a speaker to your PC.
Moreover, you can terminate the connection between the Remote station and the radio.
Besides Base stations, administrator Remote stations can also terminate a connection between another Remote
station and a radio.
■
To monitor, or disconnect a Remote station
q
In the Base station’s Remote Utility, open the Radio
List screen.
How to open:
Select the ‘Radio Operation’ mode,
then click the [Radio List] tab.
w
Select a radio with “Busy” under its name.
The operating user’s name (
PC Name
that the Re-
mote station set in the Network Setting screen),
and its IP address are displayed under “Busy.”
e
Click [Monitor] to display the Monitor screen.
r
Click [TX Monitor] to turn the Transmit Monitor func-
tion ON or OFF.
Click [RX Monitor] to turn the Receive Monitor func-
tion ON or OFF.
Slide the adjustment bar on the
Volume
field up or
down to adjust the monitoring audio volume level.
t
Click [Close] to close the screen.
D
To monitor the received or transmitted audio
q
Select
w
Select
e
Click
q
Click
e
Click
w
Adjust