1
BEFORE USING REMOTE CONTROL SYSTEM
14
When connecting to the network through a PC
PC (Remote Utility) setting
q
Enter the fixed IP address, if you use DHCP.
w
Enter the default gateway and DNS server address
of the router.
e
After setting, start the WWW browser to confirm
you can access the internet.
Router setting
Please refer to your router’s manual for details of how
to configure the settings.
When connecting to the network directly
Radio setting
q
Hold down [EXIT/SET] for 1 second to select the
Set mode menu screen.
w
Push [F-5•OTHERS] to enter the Miscellaneous
(Others) set mode.
• For the IC-7800 and IC-7700, go to step
t
.
e
Push [F-1•
▲
] or [F-2•
▼
] to select “DHCP.”
r
Rotate the main dial to select “OFF.”
t
Push [F-1•
▲
] or [F-2•
▼
] to select “IP Address.”
y
Push [F-3•
◀▶
] to select the desired part, then ro-
tate the main dial to set the fixed IP address.
(Example:
192.168.0.10)
u
Push [F-1•
▲
] or [F-2•
▼
] to select “Default Gate-
way.”
i
Push [F-3•
◀▶
] to select the desired part, then ro-
tate the main dial to set the default gateway of the
router.
(Example: 192.168.0.1)
o
Reboot the radio
The settings will take effect after rebooting.
Router setting
Please refer to your router’s manual for details of how
to configure the settings.
Select
Set
Set
■
To allow access from the Internet (Continued)
