IBM RS/6000 SP, Руководство по определению проблем

Страница: 69 / 316

This soft copy for use by IBM employees only.
niminit This command configures the NIM client package. Call this
command before you use the command
nimclient . If the workstation
has been installed from a NIM master, it is already a NIM client and
this command is not used. There is no need to use this command in
the RS/6000 SP environment.
Let
′
s have a closer look at the lsnim command and the nim command. These
two commands are basically used for NIM administration purposes once the NIM
master package has been configured.
# lsnim
master
machines master
boot resources boot
nim_script resources nim_script
spnet networks ent
lppsource resources lpp_source
psspspot resources spot
noprompt resources bosinst_data
prompt resources bosinst_data
psspscript resources script
mksysb_1 resources mksysb
sphps01 machines standalone
sphps03 machines standalone
sphps05 machines standalone
sphps06 machines standalone
Without any parameters, the command
lsnim
displays all NIM objects which have
been created on this NIM master.
In the RS/6000 SP environment, we see the previously mentioned resources.
The
-l
option displays the set of attributes, which are associated with a specific
NIM object.
# lsnim -l sphps01
sphps01:
class = machines
type = standalone
Cstate = ready for a NIM operation
platform = rs6k
if1 = spnet speth01.aixedu 02608CE87C5F ent
cable_type1 = bnc
prev_state = BOS installation has been enabled
cpuid = 002028747000
Mstate = currently running
Cstate_result = reset
The meanings of the different attributes follow:
class This attribute represents the object class. In addition to
machines, there are the classes resource and network.
type The
type
attribute defines the machine type. In this case the
workstation is a standalone system. Other possible states are
diskless and dataless. The RS/6000 SP environment supports
only the machine type standalone.
Chapter 2. The Installation Process
49