IBM RS/6000 SP, Руководство по определению проблем

Страница: 55 / 316

This soft copy for use by IBM employees only.
If you find out that the frame information is missing, you first need to add
frame information, and then reinitialize the SDR. This can be done through
the
smit
fastpath
smit frame_dialog
.
• Check the log for messages.
Check the /var/adm/SPlogs/SPdaemon.log on the control workstation and
take action to address any messages. Look for resource name
sphwlog for
SP hardware problems.
May 8 20:03:09 sp2cw0 hardmon
[
13970
]
:
LPP=PSSP,Fn=hardmon.c,SID=1.26,L#=260,
hardmon: 0026-874 Unable to determine whether
the Control Workstation is active, inactive, or non-HACWS.
In the /var/adm/SPlogs/SPdaemon.log file on the Control Workstation, there
was no entry with
sphwlog. The preceding example is an entry that was
found and is shown here just as an example entry in the log file. The same
messages are also logged under
errpt.
−
Check /var/adm/SPlogs/SPdaemon.log for messages containing the word
sphwlog.
−
Perform the following command to check the AIX error log:
# errpt -aN sphwlog
LABEL:
SPMON_INFO101_TR
IDENTIFIER: 3E6F3CE7
Date/Time: Tue May 7 15:15:07
Sequence Number: 965
Machine Id:
000081007000
Node Id: sp2cw0
Class: H
Type: UNKN
Resource Name: sphwlog
Resource Class: NONE
Resource Type: NONE
Location: NONE
Description
ELECTRICAL POWER RESUMED
Probable Causes
POWER SUBSYSTEM
User Causes
POWER OFF
Recommended Actions
NONE
Detail Data
DETECTING MODULE
LPP=PSSP,Fn=splogd.c,SID=1.16.1.7,L#=909,
DIAGNOSTIC EXPLANATION
Information; Node 1:8; powerLED; Power is on.
#
This log provides full details of all SP hardware errors.
•
If you cannot figure out the cause of the problem, call the IBM Support
Center.
Chapter 2. The Installation Process
35