IBM RS/6000 SP, Руководство по определению проблем

Страница: 73 / 316

This soft copy for use by IBM employees only.
maint This operation is used to perform operations on installed software,
such as removing or cleaning up after an interrupted installation.
It
is not used in the RS/6000 SP environment because nodes are not
configured as NIM Clients. The following example shows how to
uninstall the Performance Agent software from a workstation.
# nim -o maint -a installp_flags=
″
-u
″
-a filesets=perfagent newhost
reset This operation is used to reset the
Cstate
of a machine object back
to Ready for a NIM operation. Resources are not automatically
deallocated. The following example resets the machine object
newhost.
# nim -o reset newhost
lslpp This operation is used to display all LPPs installed on a
workstation. It is not used in the RS/6000 SP environment because
it would require the nodes to be configured as NIM Clients.
# nim -o lslpp newhost
fix_query NIM provides the fix_query operation as an interface to the
instfix
command to provide the ability to list information about installed
fixes. The
fix_query operation can be applied to SPOT resources or
NIM clients. When invoked without any optional attributes,
information about all installed fixes are displayed on the target.
The
fixes
attribute and fix_bundle resource are available to the
fix_query operation to install particular fixes. This operation is not
used in the RS/6000 SP environment because it would require the
nodes to be configured as NIM Clients.
# nim -o fix_query newhost
check The operation check performs some basic consistency checks on
the given machine object.
# nim -o check newhost
reboot This operation is used to reboot workstations. It is not used in the
RS/6000 SP environment because it would require the nodes to be
configured as NIM Clients.
# nim -o reboot newhost
The following list of operations is used by the setup_server script:
define, change, remove, allocate, bos_inst, and diag.
To Start All over Again
If you need to start NIM completely over, you can use this set of commands:
# nim -o unconfigure master
# installp -u bos.sysmgt.nim.master
# setup_server
To Reset the Machine State
Sometimes you need to reset the state of a machine object after a failed
installation or customization. You can do it in this way:
Chapter 2. The Installation Process
53