IBM PC Server 325, Руководство пользователя

Страница: 135 / 288

Updating the Server Configuration
Updating the Server Configuration
When you start your server for the first time after you add or
remove an internal option or an external small computer systems
interface (SCSI) device, you might see a message telling you the
configuration has changed. You might need to install device drivers
(required only if the option has a device driver). Refer to the
documentation that comes with your option for information about
installing any required device drivers.
Notes:
1. If you remove a SCSI device, the server might not recognize any
SCSI devices that are still connected. See Chapter 4, “Solving
Problems” for information on correcting this situation.
2. When a hard disk drive is added and you want to include it in
your startup sequence, use the Start Options selection of the
Configuration/Setup utility programs (see “Start Options” on
page 32).
Record the new configuration information in Appendix B, “Server
Records” on page 217.
Chapter 3. Installing Options
121