IBM PC Server 325, Руководство пользователя

Страница: 239 / 288

Appendix C. Ethernet Cable Specifications
This appendix contains the specifications for the unshielded
twisted-pair (UTP) and attachment unit interface (AUI) cables that
can be used to connect the server to an IEEE Standard 802.3
network.
10BASE-T Cables
To connect to the server's 10BASE-T port to a 10BASE-T port on a
repeater, use a UTP cable with RJ-45 connectors at both ends.
The cables used in a 10BASE-T link segment do not require
grounding. However, all of the devices connected to the cables
must be grounded.
If your server comes with an Ethernet interface cable, you must
install it to comply with FCC requirements.
1. Attach the Ethernet interface cable to the RJ-45 connector on the
server.
2. Connect the male end of the UTP cable to the female end of the
interface cable.
3. Connect the UTP cable to the repeater.
a. If the port on the repeater is a crossover port (also called an
MDI-X port), use a UTP cable that is wired as a
straight-through cable.

Copyright IBM Corp. 1996
225