IBM PC Server 325, Руководство пользователя

Страница: 251 / 288

Installing the Drawer Model in a Rack
Before you begin
Ÿ
Read “Electrical Safety” on page 53 and “Handling
Static-Sensitive Devices” on page 54, and the safety
information in your rack documentation.
Ÿ Turn off the server.
Ÿ
Refer to your rack documentation for additional information
on preparing the rack.
Preparing the Server
In this section, you will use the following parts:
Ÿ Two chassis brackets
Ÿ One cable arm bracket
Ÿ The inner slide from two slide brackets
Ÿ
18 short screws (8-32 by 0.325 inch)
CAUTION:
Due to the weight of the server, do not attempt to lift the server
by yourself. To avoid risking possible injury, get another person
to help you.
Attention : To avoid damage to internal components, use only the
8-32 by 0.325-inch screws included with the Rack Mounting kit.
To prepare the PC Server 325 for installation in a 19-inch rack
enclosure:
1. Attach the chassis brackets to the sides of the server.
a. Align the holes on each chassis bracket with the holes on
the side of the server.
b. Attach the chassis bracket using three 8-32 by 0.325-inch
screws.
Appendix D. Installing a PC Server 325 in a Server Rack
237