IBM PC Server 325, Руководство пользователя

Страница: 158 / 288

Error Messages
POST Message Description
164 A change in the memory configuration occurred. This
message can be caused by adding memory, or removing
memory.
Note: The server can be used with decreased memory
capacity.
Action:
1. If you have newly installed memory, start the
Configuration/Setup utility programs; then, exit,
saving the new configuration settings. Restart the
server. If the message appears again, reseat the
memory-module kit.
2. Running the diagnostic tests might isolate the
location of the problem memory-module kit and
provide additional information.
3. If the diagnostic tests fail, have the system serviced.
173 A change in configuration occurred. One or more errors
occurred in accessing the VPD.
Action: Have the system serviced.
175 A hardware error occurred.
Action: Have the system serviced.
176 The server cover has been removed improperly.
Action: Check for indications that the server has been
tampered with.
177
178 A security hardware error occurred.
Action: Check for indications that the server has been
tampered with.
182 A system board error occurred.
Action: Have the system serviced.
183 An administrator password is set and must be entered.
Action: Enter the administrator password.
Attention: You have only three chances to enter the
password correctly. After three attempts, turn off your
server. Wait at least five seconds; then turn it on. You
have three more chances to enter the password. If you
have forgotten the correct password, you must have the
system serviced (see “Using the Administrator
Password Menu” on page 29 for more information).
144
PC Server 325 User's Handbook