IBM PC Server 325, Руководство пользователя

Страница: 143 / 288

About the Test Programs
About the Test Programs
This section includes useful information about navigating through
the test programs, as well as procedures for starting and stopping
them. These programs are designed to test the IBM PC Server 325.
Non-IBM products tested with these programs might present
misleading error messages or unexpected system responses. If you
want to test a non-IBM product, refer to the information that comes
with that product.
Using the PC Server Diagnostic Diskette
Note: Always use the backup copy of the PC Server Diagnostic
Diskette when troubleshooting your server.
To start the diagnostic diskette:
1. Insert the backup copy of the PC Server Diagnostic Diskette into
the diskette drive; then, turn on the system. Or, if the system is
turned on already, press Ctrl
+
Alt
+
Del.
The system begins POST. If a power-on or administrator
password is set, the system prompts you for it.
2. After a few moments, the Main Menu appears. Follow the
instructions on the screen.
If the server stops during testing and you cannot continue, have the
system serviced.
If the diagnostic programs do not find a problem, see
“Troubleshooting” on page 176 and look for the problem symptom.
Using the Main Menu
The Main Menu, the starting point for the diagnostic tests, contains
the following choices:
Ÿ Diagnostics : When you select this choice from the Main Menu,
the Diagnostics Menu appears. The Diagnostics Menu contains
the following choices:
– Quick Check automatically checks the hardware
configuration and builds a group of tests based on the
Chapter 4. Solving Problems
129