IBM PC Server 325, Руководство пользователя

Страница: 101 / 288

Working with Internal Drives
14. Remove the five screws from the drive housing that contains
bays 3 through 7. Remove the housing from the server.
Notes:
a. The fifth screw is located under the housing, on the
left-hand side.
b. If you are installing a removable media device in bays 3
through 7, you must also remove the flat metal plate from
the front of the bay. Remove the two screws (one on each
side of the housing) that connect the metal plate to the
housing.
c. A 41.3 mm drive occupies two bays. If you are installing a
removable media device in bays 3 through 7, you must
remove the flat metal plates from the front of both bays.
d. You might need to disconnect the SCSI cable from drives
that are installed in the drive housing.
15. Attach the drive to the drive housing, using the screws that
came with the drive kit.
Attention: To ensure that the drive functions properly, do not
overtighten the screws.
Chapter 3. Installing Options
87