IBM PC Server 325, Руководство пользователя

Страница: 44 / 288

Using the Configuration/Setup Utility Main Menu
A password can contain any combination of up to seven
alphanumeric characters (A–Z, a–z, and 0–9). Keep a record of
your password in a secure place.
3. Move the cursor to the Enter Administrator Password Again
data field and type the password again.
Attention: If an administrator password is set and then
forgotten, it cannot be overridden or removed. You must
replace the system board.
4. Select Set or Change Administrator Password to save the new
password; then press Enter. The password becomes effective
immediately.
Note: A message appears if the two passwords do not match.
If this happens, press Enter to cancel the request and
return to the System Security menu.
To delete an administrator password:
1. Select Administrator Password on the System Security menu;
then press Enter.
Following a warning, the Administrator Password menu
appears.
2. Select Delete Administrator Password; then press Enter.
3. A confirmation window appears. Press Enter to delete the
administrator password. Press Esc to return to the System
Security menu.
To enable a user to change the power-on password:
1. Select Administrator Password on the System Security menu;
then press Enter.
The Administrator Password screen appears.
2. Select Power-on password changeable by user. Press the Left
Arrow (
←
) or Right Arrow (
→
) key to toggle the entry to Yes.
When this choice is enabled, System Security appears on the limited
Configuration/Setup menu. The System Security menu contains the
Power-on Password
choice.
30
PC Server 325 User's Handbook