Chapter 4. Installation
127
Figure 4-30 Change boot order
3. Highlight the first PXE option. These end with
Mac
followed by a 12-digit
hexadecimal number. Press U to move up so it is the first option. The number
after
Boot
on the bottom line refers to the option currently selected and is how
EFI enumerates that particular option.
4. Highlight the second PXE option and press U to move up so it is the second
option. If you need to move an option down press D.
5. Select Save Settings to NVRAM and exit back to the EFI Firmware Boot
Manager.
The EFI Firmware Boot Manager will now look like Figure 4-31 on page 128 and
will PXE boot by default.
EFI Boot Maintenance Manager ver 1.10 [14.61]
Change boot order. Select an Operation
Windows Server 2003, Datacenter
EFI Shell [Built-in]
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry0)
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry1)
Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F809E)
Acpi(PNP0A03,1)/Pci(4|1)/Mac(0002559F809E)
Save Settings to NVRAM
Help
Exit
Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F809E)
Boot0004
Содержание 88553RX
