IAI Rec, Инструкция по эксплуатации

Страница: 109 / 158

Chapter 5 Operation
5.2 Address Configuration
ME0394-1A
5-8
5.2.3 ELECYLINDER Position Table
The stop position and operating condition settings are established in ELECYLINDER at the
delivery.
The stop position and the operation conditions can be adjusted with a teaching tool in the simple
data setting window.
Reference
PC software operating method
Teaching pendant operating method
PC software (RCM-101-*-*) manual (ME0155)
Touch Panel Teaching Pendant manual
TB-02/02D (ME0355), TB-03 (ME0376)
Here shows an example of a screen in the teaching pendant TB-02/03 about the position table.
(The items to be set should be the same in the PC software.)
[Simple Data Setting Window]
Caution
● Make sure to touch the “Transfer” key after setting or adjusting the data.
● Switching the screen without making a transfer, the data will go back to that before
change.
Also, without transfer, the “Manual Operation” button should not be able to activate.
(3)
(3)
(3)
(1)
(2)
(2)