manualshive.com logo in svg

Hydronix Hydro-View HV02, Руководство пользователя

Поделиться
Скачать
Hydronix Hydro-View HV02 Скачать руководство пользователя страница 35

 

ADVANCED USER OPTIONS AND CONFIGURATION 

HYDRO-VIEW USER GUIDE 

D0022

 REV 1.06    

35

 

RS232 usage 

The RS232 port can be configured to operate in a number of different ways... 

Disable 

RS232 port is unused. 

Data Log 

The current moisture values are transmitted periodically, as determined 
by the Data Log Rate parameter. 

ASCII Hex 

Provides two-way communication between the Hydro-View and another 
system, using a simple ASCII Hex protocol. 

Master 

The port acts as a master device to another Hydro-View unit configured 
for ASCII Hex on its RS232 port. See 

Grouping channels

 (p49) for further 

details. 

Batch Print 

The port will print a report of the moisture variables each time the 
Average/hold input is turned off, thus providing an end of batch report. 

RS485 
Watch 

All information received by the RS485 port will be retransmitted on the 
RS232 port. By connecting the RS232 port to a personal computer 
running a terminal emulation program, it is possible to monitor what is 
happening on the RS485 port for testing purposes. 

Sensor 
Trace 

This will output the sensor voltage reading at a rate of 100 samples per 
second. It is normally used to capture the signal wave-form from the 
sensor for testing purposes. The value is output as a four digit 
hexadecimal number where 0000 corresponds to 0.00V and 7FFF 
corresponds to 12.00V. 

RS485 usage 

The optional RS485 serial port may be configured to operate in a similar way to the 
RS232 port. However, the RS485 port allows multi-drop communication on a simple 
twisted pair cable, permitting several moisture measurement channels to be interfaced 
with a single communications port. Permitted options are... 

Disable 

RS485 port is unused 

Data Log 

The current moisture values are transmitted periodically, as determined 
by the Data Log Rate parameter. 

ASCII Hex 

Provides two-way communication between the Hydro-View and another 
system, using a simple ASCII Hex protocol. 

Master 

The port acts as a master device for a maximum of three additional 
Hydro-View units configured for ASCII Hex on their RS485 ports. See

 

Grouping channels

 (p49) for further details. 

Batch Print 

The port will print a report of the moisture variables each time the 
Average/hold input is turned off, thus providing an end of batch report. 

Some of these options can be selected at the same time as similar options on the RS232 
port, although some combinations will not be logically correct in use - for example, 
configuring both RS232 and RS485 ports as 

Master

 will produce undefined results. 

Data log rate 

Determines how often data is transmitted by a port configured for 

Data Log

 operation. 

Station number 

In a communications configuration involving the 

ASCII Hex

 communications protocol this 

parameter sets the station number for this Hydro-View unit acting as a slave device. 

Number of slaves 

In a Master/Slave system (see 

Grouping channels

 (p49)) this parameter sets the 

maximum number of slaves which will be used in the system. The Master station will then 
only attempt to communicate with the number of slave units entered, avoiding wasting 
communications time on slave units which are not present in the system. 

Содержание Hydro-View HV02



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды