manualshive.com logo in svg

Hydronix Hydro-View HV02, Руководство пользователя

Поделиться
Скачать
Hydronix Hydro-View HV02 Скачать руководство пользователя страница 23

 

HYDRO-VIEW QUICK START 

HYDRO-VIEW USER GUIDE 

D0022

 REV 1.06    

23

 

‘Now’ value 

This is computed and updated continuously by the Hydro-View from 
the readings taken by the moisture sensor. 
This value is normally used for batch mixing type control systems in 
conjunction with the Hydro-Mix sensor, a stable value indicating that 
the material in the mixer is homogeneous. 
This value would also be used in the continuous process type 
application. 

Average value 

This is the average of the ‘Now’ value beginning at an off to on 
transition of the Average/Hold input and therefore represents the 
average moisture content in a batch of material. The average value is 
continuously updated until the input is turned off, at which point it is 
frozen until the start of the next batch. 
This value is normally used in ready-mix and similar 

batch weighing

 

applications in conjunction with the Hydro-Probe and Hydro-Skid 
products. 

Group M1,M2 
and Avg 
values 

Additional values computed in various ways from a group of Hydro-
Views operating together  - see 

Grouping channels (p49)

. 

It is legitimate for the moisture value to display a negative value - in some processes this 
is a useful measurement related to water absorption whilst in others it may indicate that 
the calibration of the sensor is incorrect. 

Note that the 

Average

 value is not indicated immediately but is shown the first time that 

the value is computed following the application of power to the Hydro-View. Thus systems 
not using the averaging facility will only see the 

Now 

moisture value displayed in large 

characters at the top of the display. 

You can select the moisture display page from any other non-menu page using the 
following keys… 

⇒

 Press 

 to display the 

Main menu

. The 

moisture display

 item is already 

highlighted. 

⇒

 Press   again to select the moisture display page. 

Max / Min % display 

The maximum and minimum instantaneous moisture values occurring within an averaging 
period are recorded by the Hydro-View and may be displayed on demand by pressing the 
left-hand soft key (maximum %) or centre soft-key (minimum %). The maximum or 
minimum value will replace the 'NOW' value in the lower left-hand corner of the moisture 
display page whilst the associated key is held down. 

Note that these values are only available when the batch averaging facility is being used. 

Содержание Hydro-View HV02



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды