Poseidon2
– Family manual
HW group
www.HW-group.com
35 / 104
Dry Contact Inputs
This section displays current states of dry contact inputs, including alarm status and settings. Active
alarm is indicated by a
red background
of the corresponding line.
Name (Input name)
Textual name of the input, assigned by user in the Flash Setup
Number
Unique input ID, as marked on the unit
Current Value
0
(Off)
– Open contact
1 (On)
– Closed contact
Alarm Alert
List of alarm alert settings for each input (triggered by value out of safe range)
Line background color:
Standard color =
Input is not in alarm
Red =
Input is in alarm
Sensors
The Sensors table displays information (valid at the time of the last refresh) about detected and
activated sensors, including their states.
Name (Input name)
Textual name of the input, assigned by user in the Sensors tab.
ID
16-bit ID of the sensor, unique within a particular device
Current Value
Current sensor reading, including the unit
Note: If a sensor is not connected, -999.9 is displayed.
Safe Range
A range of values in which the sensor is not in alarm state.
Hysteresis
hysteresis settings for preventing repeated alarms when the value moves around the Safe
Range value. More in chapter
Sensor hysteresis
.
Alarm Alert
List of alarm settings for each sensor (alarm is triggered by reading out of the safe range)
