Poseidon2
– Family manual
HW group
www.HW-group.com
38 / 104
Security
Security settings. Properties of individual modes are shown in the following table. Lines indicate the
method of accessing the device over IP, columns specify the restrictions resulting from the respective
security settings.
No
restrictio
ns
(default)
HW
protection
DIP = On
User Password
IP Access Filter
SNMP
Communities
Read
only
Read +
Outputs
Read &
Write
HTTP
SNMP
Comun1 Comun2
Web index
(General)
filtered
Other pages
R/W
R
R
R/W**
R/W
filtered
Values.xml
R
R
R
R
R
filtered
Setup.xml
R/W
R
R
R/W**
R/W
filtered
SNMP get (next)
R
R
filtered
R*
R*
SNMP set
W
filtered
[R*/]W*
[R*/]W*
Modbus/TCP
R/W
R
TCP setup
UDP Config
R/W
R
FW update
filtered
M2M outputs
R/W
R/W
R
R/W
R/W
* R and/or W must be enabled on the SNMP Setup tab by checking appropriate boxes.
W** Only outputs can be changed, nothing else. Even the output mode cannot be changed.
Note:
The “No restrictions” column reflects the default configuration (also shown on the
screenshots presented here). That is, HW protection DIP=Off, no password set,
IP Access filter set to 0.0.0.0/0.0.0.0.
