Poseidon2
– Family manual
HW group
www.HW-group.com
85 / 104
<Entry>
<Idx>1</Idx>
- Alert email
<To>[email protected]</To>
- Recipient of Email (40 chars)
<Cc>[email protected]</Cc>
- Recipient of Email (40 chars)
<Cc1>[email protected]</Cc1>
- Recipient of Email (40 chars)
<Cc2>[email protected]</Cc2>
- Recipient of Email (40 chars)
<Cc3>[email protected]</Cc3>
- Recipient of Email (40 chars)
</Entry>
<Entry>
<Idx>2</Idx>
- LOG periodic report email
<To>[email protected]</To>
- Recipient of Email (40 chars)
</Entry>
</MailDest>
<Time>
-
Time settings
<SNTPServer>ntp1.sth.netnod.se</SNTPServer>
-
DNS address or IP address of SNTP server (time server) (40 chars)
<TimeShift>1</TimeShift>
- time shift (in hours)
<Date>31.12.1970</Date>
- date
<Time>03:09:33</Time>
- time
</Time>
<DataLogger>
<StorePeriod>360</StorePeriod>
- Log period in sec. Minimal is 1 cycle through sensor and is depend on sensor
count.
0 = Logger disabled, max. value is 65535
<LogCapacity>100.2.23</LogCapacity>
- estimated log capacity (How long device can storage data.)
format hours.mins.secs it is only proximate value
<Report>
- Periodic email with current value and logged data
<E>0</E>
- Enable periodic reporting
<Period>5</Period>
- Reporting period in min. Minimal is 5 minutes
<Erase>0</ Erase>
- 0/1, 1=Erase reported (delivered to SMTP server) values from Logfile
<LogName>spilog</LogName>
- Name of logfile
</Report>
<LogCapacity>0.0.0</LogCapacity>
</DataLogger>
Security Section
<HTTPIPFilter>
- HTTP access filter values
<IPAddr>0.0.0.0</IPAddr>
- IF ((IPAddr AND Mask) XOR (TestAdress AND Mask)) = 0 than access enabled
<Mask>0.0.0.0</Mask>
</HTTPIPFilter>
<SNMPIPFilter>
- SNMP access filter
<IPAddr>0.0.0.0</IPAddr>
- IF ((IPAddr AND Mask) XOR (TestAdress AND Mask)) = 0 than access enabled
<Mask>0.0.0.0</Mask>
</SNMPIPFilter>
<SnmpAccess>
- SNMP access settings
<Entry>
<Idx>1</Idx>
- Entry identification
<Community>public</Community>
- Community name (32 chars
)
<R>1</R>
- Read access (0/1)
<W>0</W>
- Write access (0/1)
<E>1</E>
- Enable / Disable community (0/1)
</Entry>
<Entry>
<Idx>2</Idx>
<Community>private</Community>
<R>1</R>
<W>1</W>
<E>1</E>
</Entry>
</SnmpAccess>
<User>
- secure of HTTP server by password
<Entry>
-
Read only access to setup.xml and Flash setup interface
<Idx>1</Idx>
