Poseidon2
– Family manual
HW group
www.HW-group.com
83 / 104
RS-232/GSM Settings
<SerialPort>
<E>1</E>
- Enable Serial Port 0= Disabled, 1=GSM modem, 2=RFID reader
</SerialPort>
<SMS>
<Function>0</Function>
- Function 0-Local Modem, 1=Remote GSM GW
<Ring>0</Ring>
- Enable Ring alert (0/1)
<Dest>1</Dest>
- Remote SOAP GW destination number
<Module>Not enabled</Module>
- FOUND / NOT FOUND of GSM serial terminal
<CenterNmr/>
- SMS center Number
<Recp1/>
- SMS1 destination Number
<Recp2/>
- SMS2 destination Number
<Recp3/>
- SMS2 destination Number
<Recp4/>
- SMS2 destination Number
<Recp5/>
- SMS2 destination Number
<State>0</State>
- Test processing report
<Message/>
- SMS Test report message from last SMS test
</SMS>
Destination Section
<SnmpTraps>
- SNMP Traps settings
<Entry>
<Idx>1</Idx>
- Entry identification
<Community>public</Community>
- SNMP Community settings (32 chars)
<IPaddr>192.168.1.39</IPaddr>
- SNMP trap destination IP address
<Port>162</Port>
- SNMP trap destination port
<E>1</E>
- Enable / Disable destination (0/1)
</Entry>
<Entry>
<Idx>2</Idx>
<Community></Community>
<IPaddr></IPaddr>
<Port></Port>
<E>0</E>
</Entry>
<Entry>
<Idx>3</Idx>
<Community></Community>
<IPaddr></IPaddr>
<Port></Port>
<E>0</E>
</Entry>
<Entry>
<Idx>4</Idx>
<Community></Community>
<IPaddr></IPaddr>
<Port></Port>
<E>0</E>
</Entry>
<Entry>
<Idx>5</Idx>
<Community></Community>
<IPaddr></IPaddr>
<Port></Port>
<E>0</E>
</Entry>
</SnmpTraps>
Configuration and Services Section
<Global>
- Global settings
<Units>Celsius</Units>
-
Temperature units displayed in a Flash setup interface “Celsius”, “Fahrenheit”, “Kelvin”
<HWSec>Disabled</HWSec>
- HW DIP security value -
“Enabled” / “Disabled”
</Global>
<Network>
- Network settings
<Name>Poseidon in kitchen</Name>
- Device name (64 chars) Identical with item <Agent><DeviceName>, here R/W
<DHCP>0</DHCP>
- 0/1 - Enable DHCP, when enabled show assigned IP values.
<IPAddr>192.168.1.80</IPAddr>
- IP address of the device (Read only when DHCP enabled)
