HW Group Poseidon2 3266, Руководство пользователя

Страница: 41 / 104

Poseidon2
– Family manual
HW group
www.HW-group.com 41 / 104
Network Settings
This block configures the main network parameters
for Ethernet communication:

IP address
IP address of the unit. After a change, the
device needs to be restarted

Submask
Local network mask. After a change, the
device needs to be restarted

Gateway
Default gateway. After a change, the device needs to be restarted

Primary DNS/Secondary DNS
see below

HTTP port
Port for communication over the HTTP protocol. Default is 80

TCP Telnet Setup
Port for the terminal telnet setup mode. Default is 99

DHCP Client
Activates assigning of network parameters by DHCP server Activated in default
DNS Settings
Primary and secondary DNS server settings. Gateway needs to be set correctly for correct operation.
A DNS server is necessary for converting domain names to IP addresses. Without a correctly configured
DNS server, the following functions will not work:

Time sync (SNTP), used in e-mails and SNMP traps to timestamp events

E-mailing (SMTP)

Logging of values with timestamps
Other Settings and Information

Display temperature in
Specifies the unit of temperature (C
– Celsius / centigrade, F – Fahrenheit, K – Kelvin). The
setting only applies to the WWW interface. All other interfaces and pro
tocols use °C, unless
specified otherwise in the interface description.

System temperature in
settings of the temperature unit in communication protocols and in the log. You can select
Celsius (for back compatibility set in default) or „
by Display temp
“ when the units set in
Display temperature in will be used

HW Security Protection
A DIP switch that prevents any changes in the device configuration.

OUTPUTS: You can change values of outputs.

CONFIGURATION: No changes are permitted.