Humminbird i-PILOT LINK, Руководство по эксплуатации

Страница: 67 / 133

67 Spot-Locks
Move a Spot-Lock (Heading Sensor Required)
You can move a saved Spot-Lock or an active Spot-Lock within 5 feet of its current position. Moving a Spot-Lock is only available
with a heading sensor. See the
i-Pilot Link Owner’s Manual for more information.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the Spot-Lock location. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls ).
Move a Selected Spot-Lock
Use the following instructions to move a saved Spot-Lock on the Chart View.
Touch Screen
1. Tap a Spot-Lock icon on the chart.
2. Tap the Spot-Lock Name.
3. From the Waypoint Info menu, select Move.
4. Tap a position on the chart where you want to move the
Spot-Lock to.
5. Save: Tap the check icon in the status bar to save the
Spot-Lock at the new position.
Cancel Move Spot-Lock: Tap the X icon.
Keypad
1. Use the Joystick to move the cursor to a Spot-Lock
icon on the chart.
2. Press the ENTER key.
3. From the Waypoint Info menu, select Move. Press the
ENTER key.
4. Use the Joystick to move the Spot-Lock to a new
position on the chart.
5. Save: Press the ENTER key to save the Spot-Lock at
the new position.
Cancel Move Spot-Lock: Press the EXIT key.