Humminbird i-PILOT LINK, Руководство по эксплуатации

Страница: 103 / 133

103 Follow the Contour
Start Follow the Contour Navigation
You can start i-Pilot Link navigation if the boat position is within 1/4 mile of the selected contour. During navigation, the direction
can be changed using Reverse under the Follow the Contour menu.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust to
move the boat to the contour. If the boat does not move, confirm the prop is turned on in the menu system (see Propeller Controls ).
NOTE: If you cannot select a contour because it is displayed under AutoChart Live or Bottom Layer, see Follow Bottom Hardness
or Vegetation .
1. Select a Contour Line in the Chart View
Touch Screen
1. Press and hold a position on a contour line.
2. Select Go To > Follow the Contour.
Proceed to Set the Contour Offset .
Keypad
1. Use the Joystick to move the cursor to select a contour
line.
2. Select Go To > Follow the Contour.
Proceed to Set the Contour Offset .
Using the Touch Screen to Select a Contour Line (ONIX) Using the Joystick to Select a Contour Line (ONIX)
Press and Hold to Select Select
OR