Humminbird i-PILOT LINK, Руководство по эксплуатации

Страница: 17 / 133

17 Update Software
6. When SUCCESS is displayed, the software update is finished.
5
| Update Software for Connected Accessories
Accessory software is updated from the Files tool, and the process is similar to updating the Humminbird control head software.
If you need to update additional accessories, see your control head operations manual for details.
NOTE: Ethernet Switches and Sonar Black Boxes (SM1000/2000/3000) must be updated individually on the software update list.
6
|
Update Software for the i-Pilot Link
The i-Pilot Link has separate software updates for the controller and remote. After the software is updated on the i-Pilot Link
controller, you must go to the remote and initiate the download of the remote software to the remote itself.
NOTE: See the i-Pilot Link Owner’s Manual for additional information about updating i-Pilot software.
Prepare the i-Pilot Link System
1. Turn on the main power source.
2. Power on the trolling motor.
As determined by your trolling motor model, deploy the motor or press the Power button.
3. Turn on the i-Pilot remote by pressing the OK key. Ensure the battery is well charged. If the battery charge is not sufficient,
you will be prompted during the process to plug in the charger.
4. Power on the SOLIX, ONIX, or ION. Follow the on-screen prompts to start Normal mode.
5. Confirm i-Pilot is connected. See Installation: Confirm i-Pilot Link Installation and Connection on the Humminbird Control
Head .
It may take a minute for the equipment to be detected.
If the i-Pilot Link is not detected on the network, confirm the cable connections are secure.
6. From the Home screen, select the Files tool. Tap the icon, or press the ENTER key, to open.
7. Note the current software version number shown next to i-Pilot Link.
Update the i-Pilot Link Controller Software
1. Install the SD card with the software file(s) into the Humminbird control head card slot.
2. Press the HOME key.
3. Open the Files tool.
4. From the Software Update tab, scroll to i-Pilot Link in the list.
5. Confirm that the most current version of software is selected from the list. Select Install Now.
The Link controller will restart during the software update process.