Humminbird i-PILOT LINK, Руководство по эксплуатации

Страница: 24 / 133

24 Alarms
S
ET UP
i
-
P
ILOT
L
INK
A
LARMS
Use the instructions in this section to set i-Pilot Link alarms. When an alarm is turned on, an alert will sound and/or display on the
Humminbird control head to indicate the threshold has been met or exceeded. For more information about alarms or to set additional
alarms, see your control head operations manual.
NOTE: When i-Pilot Navigation is turned on in the menu system, the Arrival Alarm in the Alarms menu is replaced by the i-Pilot
Pre-Arrival Alarm, and the Off Course (XTE) Alarm is replaced by the i-Pilot Off Course (XTE) Alarm.
ION only: If you have connected the Alarm cable (separate purchase required) to an external klaxon or horn, select External Alarms.
Tap the menu name, or press the ENTER key, to add a check mark to the items that will trigger an external alert.
1 |
Set the Pre-Arrival Alarm
The i-Pilot Link Pre-Arrival Alarm provides an alert when the boat is within the set distance to the destination point in a waypoint,
route, or iTrack. For example, if i-Pilot Link is navigating an iTrack, and the Pre-Arrival Alarm is set to 100 feet, the alert will trigger
when the boat is within 100 feet from the iTrack End Point.
CAUTION! When the alert sounds, the i-Pilot Link will soon transition to the type of navigation set in the Arrival Mode menu option. Be
prepared that you may need to take manual control of the boat. See Configure i-Pilot with the Control Head: Set the Arrival Mode .
1. Press the HOME key.
2. Select Alarms.
3. Under Settings, select Network Alarms.
4. Select Navigation.
5. Under i-Pilot Alarms, select Pre-arrival.
6. On/Off: Tap the on/off button, or press the ENTER key, to turn it on
Adjust: Press and hold the slider, or turn the Rotary dial, to adjust the alarm threshold.