HP P2000 G3 Скачать руководство пользователя

Страница: 310 / 532

310 Alphabetical list of commands

Status

•

CRIT

: Critical. The vdisk is online but isn't fault tolerant because some of its disks are down.

•

FTDN

: Fault tolerant with a down disk. The vdisk is online and fault tolerant, but some of its disks

are down.

•

FTOL

: Fault tolerant and online.

•

OFFL

: Offline. Either the vdisk is using offline initialization, or its disks are down and data may

be lost.

•

QTCR

: Quarantined critical. The vdisk is critical with at least one inaccessible disk. For example,

two disks are inaccessible in a RAID-6 vdisk or one disk is inaccessible for other fault-tolerant

RAID levels. If the inaccessible disks come online or if after 60 seconds from being quarantined

the vdisk is QTCR or QTDN, the vdisk is automatically dequarantined.

•

QTDN

: Quarantined with a down disk. The RAID-6 vdisk has one inaccessible disk. The vdisk is

fault tolerant but degraded. If the inaccessible disks come online or if after 60 seconds from

being quarantined the vdisk is QTCR or QTDN, the vdisk is automatically dequarantined.

•

QTOF

: Quarantined offline. The vdisk is offline with multiple inaccessible disks causing user data

to be incomplete, or is an NRAID or RAID-0 vdisk.

•

STOP

: The vdisk is stopped.

•

UNKN

: Unknown.

•

: Up. The vdisk is online and does not have fault-tolerant attributes.

Jobs

Shows whether a job is running and its percent complete.

•

DRSC

: The disk is being scrubbed.

•

EXPD

: The vdisk is being expanded.

•

INIT

: The vdisk is initializing.

•

RCON

: The vdisk is being reconstructed.

•

VRFY

: The vdisk is being verified.

•

VRSC

: The vdisk is being scrubbed.

•

Blank if no job is running.

Job%

•

0%-99%

: Percent complete of running job.

•

Blank if no job is running (job has completed).

Serial Number

Vdisk serial number.

Drive Spin Down

•

Disabled

: DSD is disabled for the vdisk. This is the default.

•

Enabled - all spinning

: DSD is enabled for the vdisk.

•

Partial spin-down

: DSD is enabled for the vdisk and its disks are partially spun down to

conserve power.

•

Full spin-down

: DSD is enabled for the vdisk and its disks are fully spun down to conserve

power.

Spin Down Delay

The period of inactivity after which the vdisk’s disks and dedicated spares automatically spin down,

from 1–360 minutes.

Data Transferred

If the

perf

parameter is specified, this field shows the total amount of data read and written since

the last sampling time.

Содержание P2000 G3





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды

HP P2000 G3, Справочное руководство CLI

Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды