HP P2000 G3 Скачать руководство пользователя

Страница: 88 / 532

Alphabetical list of commands

delete vdisks

Description

Deletes specified vdisks. Unmaps and deletes all volumes and snapshots in the vdisks and

disassociates all disks assigned to the vdisks.

CAUTION:

Deleting a vdisk will delete all data on that vdisk.

NOTE:
•

You cannot delete a vdisk if it contains a snap pool that is associated with a master volume on

another vdisk.

•

If you delete a quarantined vdisk and its missing disks are later found, the vdisk reappears as

quarantined or offline and you must delete it again (to clear those disks).

Syntax

delete vdisks

[prompt yes|no]

vdisks

Parameters

prompt yes|no

Optional. Specifies an automatic response to the prompt that appears if a utility is running on the

vdisk:

•

yes

: Stop the utility and allow the command to proceed.

•

: Cancel the command.

If this parameter is omitted, you must manually reply to the prompt.

vdisks

Names or serial numbers of the vdisks to delete. For vdisk syntax, see

Command syntax

on page 22.

Example

Delete vdisks

VD1 and VD2

# delete vdisks VD1,VD2

Info: Vdisk VD1 was deleted. (VD1) (2012-01-21 12:59:54)

Info: Vdisk VD2 was deleted. (VD2) (2012-01-21 12:59:54)

Success: Command completed successfully. (2012-01-21 12:59:54)

Delete vdisk

VD3

on which a utility is running:

# delete vdisks VD3

Vdisk VD3 has jobs running. Do you want to continue?

yes

Info: Please wait - vdisks are being deleted.

Info: Vdisk VD3 was deleted. (VD3) (2012-01-21 13:00:18)

Success: Command completed successfully. (2012-01-21 13:00:18)

Содержание P2000 G3





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды

HP P2000 G3, Справочное руководство CLI

Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды