HP P2000 G3 Скачать руководство пользователя

Страница: 222 / 532

222 Alphabetical list of commands

show email-parameters

Description

Shows email (SMTP) notification parameters for events and managed logs.

Syntax

show email-parameters

Output

Email Notification

•

Disabled

: Email notification is disabled. This is the default.

•

Enabled

: Email notification is enabled.

Email Notify Filter

Shows the minimum severity for which the system should send event notifications:

•

crit

: Sends notifications for Critical events only.

•

error

: Sends notifications for Error and Critical events.

•

warn

: Sends notifications for Warning, Error, and Critical events.

•

info

: Sends notifications for all events.

•

none

: Disables email notification and clears the settings. This is the default.

This parameter does not apply to managed-logs notifications.

Email Address (1–3)

Shows up to three email addresses for recipients of event notifications.

Log Destination

Shows the email address for the log collection system used by the managed logs feature.

Email Server

The IP address of the SMTP mail server to use for the email messages.

Email Domain

The domain name that, with the sender name, forms the “from” address for remote notification.

Email Sender

The sender name that, with the domain name, forms the “from” address for remote notification.

Include Logs

Shows whether system log files will automatically be attached to email notification messages

generated by the managed logs feature. This is the “push” mode for managed logs.

This option is

disabled by default.

Example

Show settings for email notification:

# show email-parameters

Email Parameters (SMTP)

-----------------------

Email Notification: Enabled

Email Notify Filter: warn

Email Address 1: [email protected]

Email Address 2:

Email Address 3:

Log Destination: [email protected]

Email Server: 10.1.1.10

Email Domain: mydomain.com

Email Sender: RAIDsystem

Include Logs: Disabled

Success: Command completed successfully. (2012-01-18 12:51:04)

Содержание P2000 G3





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды

HP P2000 G3, Справочное руководство CLI

Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды