HP P2000 G3 Скачать руководство пользователя

Страница: 135 / 532

HP P2000 G3 MSA System CLI Reference Guide 135

partner-firmware-upgrade enabled|disabled|on|off

Optional. Sets whether component firmware versions are monitored and will be automatically

updated on the partner controller.

•

disabled

off

: Partner firmware upgrade is disabled.

•

enabled

: Partner firmware upgrade is enabled. This is the default.

partner-notify enabled|disabled|on|off

Optional. Sets whether to notify the partner controller that a trigger condition occurred. Enable this

option to have the partner also change to write-through mode for better data protection. Disable this

option to allow the partner continue using its current caching mode for better performance. The

default is

disabled

•

disabled

off

: Notification is disabled. This is the default.

•

enabled

: Notification is enabled.

power-supply-failure enabled|disabled|on|off

Optional. Sets whether the cache policy automatically changes to write-through when a power

supply fails.

•

disabled

off

: The power-supply failure trigger is disabled. This is the default.

•

enabled

: The power-supply failure trigger is enabled.

smart enabled|disabled|on|off|detect-only

Optional. Enables or disables SMART (Self-Monitoring Analysis and Reporting Technology)

monitoring for all disks in the storage system.

•

disabled

off

: Disables SMART for all disks in the system and for all disks added to the

system.

•

enabled

: Enables SMART for all disks in the system and for all disks added to the system.

This is the default.

•

detect-only

: Detects but does not change the SMART setting of each disk in the system, and

for each new disk added to the system.

super-cap-failure enabled|disabled|on|off

Optional. Sets whether the cache policy will change from write-back to write-through when the

super-capacitor that provides backup power for cache is not fully charged or fails.

•

disabled

off

: The super-capacitor failure trigger is disabled.

•

enabled

: The super-capacitor failure trigger is enabled. This is the default.

sync-cache-mode immediate|flush

Optional. Sets how the

SCSI SYNCHRONIZE CACHE

command is handled.

•

immediate

: Good status is returned immediately and cache content is unchanged. This option

is the default.

•

flush

: Good status is returned only after all write-back data for the specified volume is flushed

to disk.

temperature-exceeded enabled|disabled|on|off

Optional. Sets whether the system will shut down a controller when its temperature exceeds the

critical operating range.

•

disabled

off

: The over-temperature trigger is disabled. This is the default.

•

enabled

: The over-temperature trigger is enabled.

Содержание P2000 G3





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды

HP P2000 G3, Справочное руководство CLI

Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды