HP P2000 G3 Скачать руководство пользователя

Страница: 180 / 532

180 Alphabetical list of commands

set snmp-parameters

Description

Sets SNMP parameters for event notification. To enable or disable SNMP requests to the MIB use the

set protocols

command.

Syntax

set snmp-parameters

[enable crit|error|warn|info|none]

[add-trap-host

address

]

[del-trap-host

address

]

[trap-host-list

trap-host-list

]

[read-community

string

]

[write-community

string

]

Parameters

enable crit|error|warn|info|none

Optional. Sets the level of trap notification:

•

crit

: Sends notifications for Critical events only.

•

error

: Sends notifications for Error and Critical events.

•

warn

: Sends notifications for Warning, Error, and Critical events.

•

info

: Sends notifications for all events.

•

none

: All events are excluded from trap notification and traps are disabled.

add-trap-host

address

Optional. Specifies the IP address of a destination host that will receive traps. Three trap hosts can

be set.

del-trap-host

address

Optional. Deletes a trap destination host.

trap-host-list trap-host-list

Optional. Replaces the current list.

read-community

string

Optional. Sets a community string for read-only access. This value is also included in traps that are

sent. The value is case sensitive; can include any character except left angle bracket, single quote,

and double quote; and can have a maximum of 31 bytes.

write-community

string

Optional. Sets a community string for write access. The value is case sensitive; can include any

character except left angle bracket, single quote, and double quote; and can have a maximum of 31

bytes.

Example

Enable Critical events only, specify a trap host, and set the community string for read-only access:

# set snmp-parameters enable crit add-trap-host 172.22.4.171 read-community
public

Success: Command completed successfully. - SNMP parameters were
changed.(2011-10-11 14:43:26)

Содержание P2000 G3





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды

HP P2000 G3, Справочное руководство CLI

Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды