HP P2000 G3 Скачать руководство пользователя

Страница: 191 / 532

HP P2000 G3 MSA System CLI Reference Guide 191

show advanced-settings

Description

Shows the settings for advanced system-configuration options.

Syntax

show advanced-settings

Output

Vdisk Background Scrub

Shows whether disks in vdisks are automatically checked for disk defects to ensure system health. The

interval between background vdisk scrub finishing and starting again is specified by the Vdisk

Background Scrub Interval

field.

•

Disabled

: Background vdisk scrub is disabled.

•

Enabled

: Background vdisk scrub is enabled. This is the default.

Vdisk Background Scrub Interval

Shows the interval between background vdisk scrub finishing and starting again, from 1–360 hours.

The default is 24 hours.

Partner Firmware Upgrade

Shows whether component firmware versions are monitored and will be automatically updated on

the partner controller.

•

Disabled

: Partner firmware upgrade is disabled.

•

Enabled

: Partner firmware upgrade is enabled. This is the default.

Utility Priority

Priority at which data-redundancy utilities, such as vdisk verify and reconstruct, run with respect to

I/O operations competing for the system's processors. (This does not affect vdisk background scrub,

which always runs at “background” priority.)

•

High

: Utilities have higher priority than host I/O. This can cause heavy I/O to be slower than

normal. This is the default.

•

Medium

: Utility performance is balanced with host I/O performance.

•

Low

: Utilities run at a slower rate with minimal effect on host I/O.

SMART

Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is enabled or disabled

for disks.

•

Detect-Only

: Each disk in the system retains its individual SMART setting, as will new disks

added to the system.

•

Enabled

: SMART is enabled for all disks in the system and will be enabled for new disks added

to the system. This is the default.

•

Disabled

: SMART is disabled for all disks in the system and will be disabled for new disks

added to the system.

Dynamic Spare Configuration

Shows whether the storage system will automatically use a compatible disk as a spare to replace a

failed disk in a vdisk if no compatible spare is available.

•

Disabled

: The dynamic spares feature is disabled. This is the default.

•

Enabled

: The dynamic spares feature is enabled.

Enclosure Polling Rate

Shows the interval in seconds at which the storage system will poll each enclosure's Enclosure

Management Processor (EMP) for status changes, from 5–3600 seconds. The default is 5 seconds.

Host Control of Caching

Shows whether hosts are allowed to use the

SCSI MODE SELECT

command to change the storage

system's write-back cache setting.

•

Disabled

: Host control of caching is disabled. This is the default.

•

Enabled

: Host control of caching is enabled.

Содержание P2000 G3





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды

HP P2000 G3, Справочное руководство CLI

Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды